PortServer® TS H MEI Extended temperature tolerance Locking power connector 1, 2 or 4 ports Switch-selectable RS-232/422/485 RJ-45 serial The PortServer TS H MEI family of serial servers is designed specifically for utility plants, pipelines, traffic management facilities or any remote application requiring a hardened serial-to-Ethernet solution that can withstand extreme temperatures. Available in one-, two-, or four-port models, PortServer TS H MEI makes it easy to network-enable and remotely manage variable message signs, loop detectors, ramp meters or any RS-232/422/485 serial device. Digi's patented RealPort® COM port redirector technology makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer, allowing existing software applications to work without modification. PortServer TS H MEI also delivers data security via SSHv2, full SNMP device management, and industry-leading low latency. PortServer TS 1 H MEI 70001917 Features 10/100Base-T Ethernet support 1/2/4 ports Switch-selectable RS-232/422/485 RJ-45 serial Baud rates up to 230 Kbps Full modem and hardware flow control TCP/UDP Socket Services UDP Multicast Telnet and Reverse Telnet Patented RealPort® with encryption for COM and TTY ports 9-30VDC power input RFC 2217 Modem emulation SNMP (read/write) PPP SSHv2 Port buffering Low latency Modbus to Modbus/TCP conversion HTTP SSL/TLS Digi Port Authority–Remote management diagnostics and auto-discovery tool DHCP/RARP/ARP-Ping for IP address assignment LED status for link and power RJ-45/DB-9F crossover cable included for configuration Operating Systems AIX 32 & 64 – encrypted Compaq Tru64 HP-UX Linux – encrypted Windows® 98, ME Windows XP Windows Server™ 2003 Windows 2000 Windows NT® 4.0 SCO® OpenServer™ – encrypted SCO UnixWare™ Solaris™ (Intel) Solaris (SPARC) TCP/UDP Socket Services are operating system independent Dimensions Length: 5.25 in (13.34 cm) Width: 3.33 in (8.46 cm) Depth: 0.95 in (2.41 cm) Weight: 2.25 oz (64.00 g) Regulatory Approvals FCC Part 15, A CE EN55024 EN55022, Class A UL/CUL60950 IEC60950 & CB AS/NZS 3548 VCCI V–3/99 .05 Power Requirements 9-30VDC @ 0.5 Amps max (12VDC extended temp power supply sold separately) Environmental Operating temperature: -35º C to +74º C (-31º F to +165º F) Relative Humidity: 5% to 90% (non-condensing) Ethernet isolation: 1500VAC min per IEEE 802.3/ANSI +3.263 Serial port protection (ESD): +15 kV air 6 AP and +8 kV contact discharge per IEC 100-4-2