Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö

APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

Etusivu UPS & Power UPS APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)
APC Smart-UPS SC 450VA 230V - 1U Rackmount/ Tower (SC450RMI1U)

APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

  • Tuote Telineeseen asennettu UPS
  • Virta 450VA
Ei varastossa

NEW! APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower

APC Smart-UPS SC, 450VA/280W, Input 230V/Output 230V, Interface Port DB-9 RS-232, Rack Height 1 U

Includes: CD with software, Rack Mounting Brackets, Smart UPS signalling RS-232 cable, User Manual

Product Overview

SC450RMI1U Features

Front-access servicing
Multiple mounting methods
Rack/Tower convertible

Smart-UPS SC Features


Network manageable Monitor and control the UPS remotely via included PowerChute software.
Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predictive failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Serial Connectivity Provides management of the UPS via a serial port.
LED status indicators Enables quick understanding and response to visual indicators showing UPS status.
InfraStruXure Manager compatible Enables centralized management via APC's InfraStruXure Manager.


Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery.
User-replaceable batteries Battery replacement is simple and safe, and can be performed by the end-user. A technician is not required to replace the PowerShield battery
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.


Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Cold-start capable Provides temporary battery power when the utility power is out.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Resettable circuit breakers Enables quick recovery from UPS overload events.
Technical Specifications


Output Power Capacity 280 Watts / 450 VA
Max Configurable Power 280 Watts / 450 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor up to 5 : 1
Waveform Type Stepped approximation to a sinewave
Output Connections
(4) IEC 320 C13
(2) IEC Jumpers


Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V

Batteries & Runtime

Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 5 hour(s)
Replacement battery cartridge RBC18
RBC™ Quantity 1
Typical Backup Time
at Half Load
19.4 minutes (140 Watts)
Typical Backup Time
at Full Load
5.9 minutes (280 Watts)
Runtime Chart Smart-UPS SC

Communications & Management

Interface Port(s) DB-9 RS-232
Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO) Optional

Surge Protection and Filtering

Surge energy rating 320 Joules
Filtering Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Dataline protection RJ-11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines),RJ45 10/100 Base-T Ethernet protection


Maximum Height 44.00 mm
Maximum Width 432.00 mm
Maximum depth 383.00 mm
Rack Height 1U
Net Weight 10.18 KG
Shipping Weight 11.73 KG
Shipping Height 164.00 mm
Shipping Width 476.00 mm
Shipping Depth 589.00 mm
Color Grey
Units per Pallet 24.00


Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 38 dBA
Online Thermal Dissipation 38 BTU/hr


Regulatory Approvals C-tick,CE,GOST,VDE
Standard Warranty 2 years repair or replace
*The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.